Skip to content
Theme Lab

viaqr · Logo & icons

The same logo, given a construction. The mark is now the real QR finder pattern on a seven-module grid, the type is Fraunces cut to the weight of the ring, every gap is counted in modules, and each icon is drawn for the pixel grid it will land on. This tab's favicon is the new one.

What changed, and why

The original was right in spirit: a locator square standing between two short words, reading via the code to the qr. It was never given a system. These five changes keep the idea and give it one.

  1. The mark is the real finder pattern. 1 : 1 : 3 : 1 : 1 on a 7×7 grid, the square every phone camera actually hunts for, instead of 1 : 1 : 2 : 1 : 1 on a 6×6.
  2. The type matches the ring. Fraunces at weight 450, where the letter stem is 1.04× the ring module. At 600 it was 1.38×, and the mark looked thin.
  3. One unit of measure. Gaps, clear space, icon padding and minimum sizes are all counted in modules (one seventh of the mark).
  4. Pixel-snapped icons. The favicon is drawn on a 16-unit grid, so the mark lands on whole pixels at 16, 32, 48 and 64 px.
  5. One asset per job. An adaptive SVG favicon, a quiet-zone ICO, an opaque Apple icon, a maskable Android icon, an opaque email header, and vector PDFs for invoices.
L1

Before & after

The shipped originals next to the refined versions.

Original viaqr wordmark
Before. Black, unknown serif at regular weight, 1:1:2:1:1 mark, gaps set by eye.
Refined viaqr wordmark
After. Slate Fraunces 450, Mulberry finder, gaps of 1.25 and 1 modules.
Original app icon
Before: the mark bleeds off the canvas, with seams between its five rectangles.
New app icon
After: one path, centered at 7/13 of the canvas.
L2

The mark

A QR finder pattern, drawn as one even-odd path on a seven-module grid.

1 1 3 1 1
Refined, 7 × 7 1 : 1 : 3 : 1 : 1 · eye 43% of width
1 1 2 1 1
Original, 6 × 6 1 : 1 : 2 : 1 : 1 · eye 33% of width

The eye grows from a third of the mark to three sevenths. That is the proportion a scanner's finder detector scans for, and it gives the mark more mass at favicon size, where the eye is the part that survives. One path with even-odd fill replaces five abutting rectangles. Abutting shapes antialias into hairline seams, which you can see in the original icon above.

L3

Wordmark type

Seven candidates, each laid out by the same rules. The ratio is letter stem ÷ ring module, measured from the outlines.

Chosen · Fraunces 450 · opsz 48 · SOFT 50

stem/module 1.04

Fraunces is already viaqr's display face, so the wordmark and every page heading share a voice. Weight 450 brings the stem to the ring's thickness. At optical size 48 the letters have enough contrast to feel set, not drawn, and stay sturdy at a 24 px header. SOFT 50 rounds the terminals slightly, which is the warmth the palette asks for. The mark sits on the baseline and rises to the top of the i's dot, as it did originally.

Fraunces 600 · opsz 36 1.38
Fraunces 500 · opsz 48 1.21
Fraunces 450 · opsz 48 1.04
Literata 500 · opsz 36 1.05
Newsreader 500 · opsz 36 0.99
Source Serif 4 500 · opsz 36 0.94
Inter 500 0.99

Literata is the strongest runner-up. It is the sturdiest at small sizes and on low-resolution receipts, but it brings a second serif into a brand that already has one.

Newsreader is the closest to the original's feel. It is elegant, but its smaller x-height makes the mark tower over "via" more than it should.

Inter is the sans counterpoint. Its stem matches the ring, but square letters next to a square mark lose the tension that makes the lockup read as "via ▣ qr".

L4

Lockup proportions

Every measurement in modules (m = one seventh of the mark).

mark top = i dot x-height baseline = mark foot 1.25m 1m clear space 2m

Height. The mark stands on the baseline and reaches the top of the i's dot, so it reads as a capital-height character between two lowercase words.

Gaps. These are measured ink to ink. The gap after the mark is a quarter-module tighter because the q brings a round bowl to the mark and the a brings a straight stem. A round edge has to sit closer to look equally spaced.

Clear space. Keep 2 modules on every side, about the width of the i. The lockup is 32.50 m wide and 9.38 m tall, descender included.

L5

Small sizes

Actual rasters at each size, then the same pixels magnified six times.

16 px32 px48 px64 px
Original mark 6 units → 2.67 px modules at 16
Original mark at 16 px, magnified
Original mark at 32 px, magnified
Refined favicon 16-unit grid → 2 px modules at 16
Refined favicon at 16 px, magnified
Refined favicon at 32 px, magnified

The magnified 16 px row tells the story. The original's edges fall between pixels and blur into a pink halo, so at tab size the eye merges with the ring. The refined mark is 14 px of solid 2 px modules with a 1 px margin, and it scales by whole numbers to 32 (4 px), 48 (6 px) and 64 (8 px).

L6

Favicon in the browser

The SVG follows the OS color scheme. The ICO can't, so it carries its own quiet zone.

viaqr — Dashboard
viaqr (ICO)
Light browser: SVG favicon in the active tab, ICO fallback in the inactive one.
viaqr — Dashboard
viaqr (ICO)
Dark browser: SVG favicon in the active tab, ICO fallback in the inactive one.
Tab background Adaptive SVG Mulberry only
Light, active tab 6.76:1 pass 6.76:1 pass
Light, tab strip 5.15:1 pass 5.15:1 pass
Dark, active tab 5.36:1 pass 1.79:1 fail
Dark, tab strip 7.15:1 pass 2.38:1 fail

Graded against WCAG 1.4.11's 3:1 for graphics. A Mulberry-only favicon disappears on a dark tab strip, which is why the SVG switches to Thistle under prefers-color-scheme: dark. The ICO is for places that can't read SVG (bookmarks, RSS readers, Windows shortcuts) and can't adapt either. It puts the finder on a Bond tile instead, the same rule viaqr's QR codes follow: a finder is always dark on light. It reads on any background: Mulberry on Bond is 6.57:1.

L7

App icons

One artwork, placed on a 13-module grid, survives every platform mask.

Maskable 512, under each launcher's mask

Full bleed + safe zone
iOS / squircle
Circle
Teardrop

The dashed circle is Android's maskable safe zone, 80% of the canvas. A square fits inside it up to 56.6% of the canvas width. The mark is 7/13 = 53.8%: as large as it can be while still clearing the zone, with a whole number of modules on each side.

Grid: 13 modules vs. the QR spec's 15

13 · mark 53.8% · chosen
15 · mark 46.7%

The spec's four-module quiet zone is the honest number for a scannable code, but on a home screen it leaves the mark looking lost. Three modules holds up down to Spotlight size.

Plate color: considered

Mulberry plate, Bond mark Shipped. Brand color is what makes a home-screen icon findable, and Bond on Mulberry is 6.57:1.
Bond plate, Mulberry mark The truest finder, dark on light, but a pale tile disappears among white app icons. Good for a Mac dock or print.
Moor plate, Thistle ring, Gorse eye The signature pairing, and handsome. Held back: it spends Gorse on chrome, which the palette rules out. A candidate for a dark or seasonal alternate icon.

The icon is a reversed finder: light ring, Mulberry gap, light eye. That is fine for a logo, which never has to scan. viaqr's printed codes still follow the dark-on-light rule in DESIGN.md. A finder is symmetric, so unlike a directional mark it needs no optical offset and sits at true center.

L8

Color variants

Six approved pairings, three to avoid. Contrast is the mark against its ground, measured.

Primary Default everywhere light. mark 6.57:1
type 13.39:1
On Fleece Page backgrounds, sidebars. mark 6.16:1
type 12.54:1
Reverse Hero, footer, dark mode, social card. mark 8.23:1
type 16.73:1
On brand Mulberry bands, app icon plates. mark 6.57:1
type 6.57:1
One color Single-ink print, invoices, stamps. mark 18.02:1
type 18.02:1
One color, reverse Dark single-ink: etching, merch. mark 16.83:1
type 16.83:1

Avoid

✕
Mulberry mark on Moor 2.74:1. The light-mode mark on the dark block sinks. Switch to Thistle.
✕
Gorse mark on Bond 1.85:1. Gold is a highlight, never a logo color on light grounds.
✕
Thistle mark on Fleece 2.05:1. Thistle is the dark-mode mark only.

Also avoid: recoloring the ring and eye differently (except the held-back Gorse icon), outlining the mark, rounding its corners, setting "via" or "qr" in another face, or capitalizing. The name is always lowercase viaqr, including at the start of a sentence.

L9

In context

The kit doing the jobs it was drawn for.

App header, live tokens

CodesPagesForms
PricingSign in
Inline SVG. Type uses the ink token and the mark uses accent, so the scheme toggle in the header recolors it correctly. On the deep block the mark is always Thistle. The header height is 24 px, where the module is 2.56 px.

Transactional email, light and dark inbox

viaqr
viaqr
Dark-mode mail clients recolor HTML but leave images alone. A transparent PNG with Slate type would vanish on a black inbox, so the email header is an opaque Bond plate with clear space built in. It reads as a deliberate card in both.

Invoice

viaqr

Invoice

No. 0000-0000

ItemAmount
Plan, monthly—
Additional seats—
Use the vector PDF in Prawn or another PDF generator, so it stays sharp at any print resolution. For black-and-white runs, switch to the Moor-only PDF instead of letting the printer gray out the Mulberry.

Social card, 1200 × 630

viaqr social card
The reverse lockup centered on Moor. It's the fallback og:image for pages that don't have their own art. It sits in the middle third, so square crops in chat apps keep it whole.
L10

Rules & kit

Everything here is generated by npm run logo:viaqr. Edit the script, not the files.

Clear space

2 modules on every side of the lockup or mark. Nothing intrudes, not even a hairline.

Minimum size

Mark: 14 px (2 px modules). Lockup: 72 px wide on screen, 20 mm in print. Below that, use the mark alone.

Name

Always lowercase viaqr. The mark never replaces a letter. It stands between two words.

File What Use for Size
viaqr-wordmark.svg Wordmark — Slate type, Mulberry mark Site headers, documents, anything on Bond, Fleece or white 6.0 KB
viaqr-wordmark-reverse.svg Wordmark — reverse On Moor, Peat, or any dark ground; dark-mode headers 6.0 KB
viaqr-wordmark-mono.svg Wordmark — one color (currentColor) Inline in HTML; inherits text color. Single-ink print, embossing, fax 6.0 KB
viaqr-wordmark.pdf Wordmark — vector PDF, full color Invoice and receipt generators (Prawn, wkhtmltopdf), print 4.4 KB
viaqr-wordmark-mono.pdf Wordmark — vector PDF, Moor only Black-and-white invoices, letterhead, rubber stamps 4.4 KB
viaqr-mark.svg Mark — Mulberry Avatars, inline brand marks, QR-code centers (EC level Q+) 200 B
viaqr-mark-reverse.svg Mark — Thistle On dark grounds 200 B
viaqr-mark-mono.svg Mark — one color (currentColor) Replaces app/views/shared/icons/_viaqr_logo_graphic.html.erb 205 B
favicon.svg Favicon — SVG, follows the OS scheme Every modern browser. Mulberry on light chrome, Thistle on dark 251 B
favicon.ico Favicon — ICO (16, 32, 48), Bond quiet-zone tile Legacy browsers, RSS readers, Windows shortcuts, bookmarks bars 14.7 KB
apple-touch-icon.png Apple touch icon — 180 px, opaque iOS/iPadOS home screen; iOS applies its own corner mask 454 B
icon-192.png PWA icon — 192 px, rounded plate Web manifest, purpose "any" 2.6 KB
icon-512.png PWA icon — 512 px, rounded plate Web manifest, purpose "any"; desktop PWA installs 7.8 KB
icon-maskable-512.png PWA icon — 512 px, full bleed Web manifest, purpose "maskable"; Android adaptive icons 2.1 KB
viaqr-email@2x.png Email header — 360×132, opaque Bond Transactional email. Display at width="180" 6.8 KB
viaqr-og.png Social card — 1200×630, Moor og:image / twitter:image for pages without their own art 15.6 KB

<head>

<link rel="icon" href="/favicon.ico" sizes="48x48">
<link rel="icon" href="/favicon.svg" type="image/svg+xml">
<link rel="apple-touch-icon" href="/apple-touch-icon.png">
<link rel="manifest" href="/manifest.webmanifest">
<meta name="theme-color" content="#f8f3f5" media="(prefers-color-scheme: light)">
<meta name="theme-color" content="#171114" media="(prefers-color-scheme: dark)">

manifest.webmanifest

{
  "name": "viaqr",
  "short_name": "viaqr",
  "theme_color": "#933a76",
  "background_color": "#f8f3f5",
  "icons": [
    { "src": "/icon-192.png", "sizes": "192x192", "type": "image/png" },
    { "src": "/icon-512.png", "sizes": "512x512", "type": "image/png" },
    { "src": "/icon-maskable-512.png", "sizes": "512x512",
      "type": "image/png", "purpose": "maskable" }
  ]
}

Email header

<img src="https://viaqr.com/viaqr-email@2x.png"
     width="180" height="66" alt="viaqr"
     style="display:block;border:0">

Carrying it into viaqr

  • Replace viaqr-logo-final.png (Rails assets and viaqr-ui) with viaqr-wordmark.svg, or inline the mono SVG for currentColor headers.
  • Replace the body of shared/icons/_viaqr_logo_graphic.html.erb with the single path from viaqr-mark-mono.svg (viewBox 0 0 7 7).
  • Replace public/icon.png, icon.svg and viaqr-ui's favicon.svg with the favicon and icon set. Then fix pwa/manifest.json.erb: its theme_color is still "red".
  • viaqr-og.png supersedes the current 795 × 386 OG image, which is below the 1200 × 630 the platforms expect.